Problem: 1.The end of the wood veneer is thinner than others peeled by wood veneer lathe. 2.The end of the wood veneer is thick and curled. Reason: The peeling knife is too low or too high and the knife gap is small or too large, and the knife position needs to be adjusted.

The veneer peeling machine is the main machine of plywood manufacturing. Its working condition affects the quality of veneer and plywood. The quality of the wood peeling maintenance work directly affects the quality and output of the veneer. 1. The impact of the wear of the rotary wood peeler machine on the quality of the veneer The maintenance of the rotary veneer peeling machine during productio...

How veneer peeled by Nose Bar & Teeth Roller Spindleless Veneer lathe reduce plywood hot pressing cost      During plywood hot pressing, as the temperature and moisture content of the plywood slabs change, the wood veneer is gradually compressed and the thickness of the plywood slabs gradually decreases. This loss is compression loss, which is related to factors such as the hot ...