-
Jun 8,2022
First stage of plywood hot press This stage is the auxiliary time. In order to improve the productivity and product quality of the hot press, it is required that this stage should be carried out at the fastest speed and the time should be as short as possible. After the slab is loaded into the press, it is not subjected to external pressure. The glue layer near the hot pressing plate heats up very...
View More
-
Dec 7,2022
The meaning of veneer dryer The moisture content of the veneer after rotary cutting is very high. If the veneer is directly sizing without drying treatment, and then the billet is hot-pressed, when the veneer is sizing, due to too much water, it is easy to cause glue bleeding, which will make the veneer glued together. Lack of glue on the surface; b...
View More
-
Feb 17,2023
Laminated veneer lumber is a structural material made by processing wood into thicker veneers, drying, sizing, forming blanks along the grain, and laminating and gluing. Because it is basically formed along the grain, it is also called parallel plywood. Because it is similar to the performance of glued wood, it is also called veneer glued wood. Its manufacture is very similar to plywo...
View More
-
Apr 11,2023
Machine for LVL production-Veneer peeling lathe Rotary veneer peeling is one of the key processes in LVL production. The rotary veneer peeling machine is to process a certain length and a certain diameter of wood into a continuous veneer strip, which becomes a certain specification of veneer after cutting. The performance and operation of the rotary cutting machine has a direct impact on the outpu...
View More
-
Apr 20,2023
Roller veneer dryer: It uses a series of upper and lower rollers to convey the veneer through the dryer. All the lower rollers are driven by a motor through a transmission device through a chain, while the upper rollers are driven by the lower rollers through a pair of long-toothed gears. Therefore, the upper rollers can be used with different veneer thicknesses float up and down within a certain ...
View More
-
May 2,2023
Hot plate veneer dryer: used for drying the thick veneer manufactured by LVL, usually the roller dryer is used first, and then the hot plate dryer is used. This process can not only ensure the quality of the veneer, but also improve the efficiency of veneer drying. The host structure of the hot plate dryer is basically the same as that of the ordinary plywood hot press machine. In order to shorten...
View More
-
Jun 5,2023
During the LVL production process, the wood loss of each main process is roughly as follows: 1. Sawing loss (truncation, sawdust): generally 2%-3% 2. Rotary cutting loss (wood core, broken veneer): The proportion of wood core and broken veneer is related to the material and log diameter. LVL uses low-grade timber and small-diameter timber, but because veneer lengthening and spindleless veneer peel...
View More
-
Aug 29,2023
Hot press veneer dryer machine, which have been studied for a long time, can be used both for drying sawn timber and for drying veneer. The hot press dryer combines the dual effects of pressurization and contact heat transfer. There are two main types of veneer hot-press drying: continuous hot-press dryer and repeated hot-press dryer. The characteristics of veneer drying by hot press...
View More
